Here's the complete post from CSR:
Hey just wanted to let everyone know there there is going to be a FREE Introduction to Engine Building Seminar at Stewart Racing Engines on Gasoline Alley, Nov 13th. This will cover basic tips and critical things that are often overlooked.
It would be greatly appreciated if you could send me an e-mail at vtecluke99@aol.com and let me know how many people are coming with you so that we have some sort of an idea what to expect.
Place: Stewart Engines
357 Gasoline Alley
Indianapolis, IN 46222
Phone: (317) 244-9129
When: Saturday November 13th
12 Noon
See you all the 13th and come prepared with questions!
Here is a basic Overview of what will be covered:
Engine Building Fundamentals
?A Technical Discussion Of Overhead Cam Small Displacement Engines?
1) The Five Key Points for Success
a) Technical knowledge
Having the correct specifications
c) Using special tools
d) Keeping the work environment clean
e) Understanding fasteners and torque values
2) The Bottom End Build Up
a) Choosing the right parts for your application
Critical clearances and tolerances
c) Measuring the parts
d) Working with the machine shop
e) Cleaning and parts prep
3) Cylinder Head Basics
a) The five most common problems
A discussion of seats and guides
c) Why is surface finish so important?
d) Springs, retainers and locks
e) Camshafts and valve clearance
4) Assembly Techniques
a) Installing the crank rods and pistons
Proper Head installation
c) Cam timing?What effects it and how do I check it?
d) Finishing the bottom end
e) Use of sealers and gaskets
f) Why is the torque so important?
5) Preparing An Engine For Install And Start Up
a) Ensuring a quick start up
Engine oil prime
c) Basic engine break in procedures
d) Engine evaluation after the run in period
General Question and Answer Period
Live Shop Demos and interactive Displays